Description
Article description
Torque Measuring System consisting of:
- Sensor Signal Amplifier with Rotor Antenna Kit
- Evaluation Unit
- Documentation
Maximum shaft diameter: 300 mm
Measuring system
- Measuring range (default): 1 mV/V
- Signal resolution: 16 Bit
- Linearity and hysteresis: <0.25%
- Distance rotor to evaluation unit: 0.5 … 5 mm
- PCM technique
- Maintenance-free
- Remote Shunt Calibration function with resistor
SV_3a
- Number of channels: 1
- Strain gauge bridge (external): 350 / 1.000 ohms
- Full / Half / Quarter bridge
- Measuring range (default): 1 mV/V
- Modifiable by resistance: 0.1 … 10 mV/V
- Signal bandwidth: 0 … 1 kHz
- Zero and gain drift: ±0.05%/°C
- On the shaft
- Dimensions: 8 x 18 x 33 mm
- Temperature range: -10 … +85°C
- Protection class according to EN 60529: IP42
ROT_FER
- Temperature range: -10 … +85°C
- Protection class according to EN 60529: IP67 with sealing kit
(not included in delivery, see Sealing kit 30-100)
AW_DAnt
- with integrated PickUp (stator antenna)
- Number of channels: 1
- Analog output voltage: 0 … ±10 V / 50 ohms
- Signal bandwidth: 0 … 1 kHz
- Zero and gain drift: ±0.05%/°C
- Supply voltage: 24 VDC ±10%, 220 mA
- Connection: D-SUB-9 plug
- Dimensions: 90 x 50 x 22 mm
- Temperature range: -10 … +55°C
- Protection class according to EN 60529: IP42
VKab_D_ana_Kal
- Cable length: 2 m
- Connector: D-SUB-9 socket
- with integrated button to check the calibration
Included in delivery
- Sensor signal amplifier SV_3a
- Rotor antenna kit
- Evaluation Unit AW_DAnt
- D-SUB-9 socket for systems with analog data output
- Documentation on USB-Stick
Not included in delivery
- Strain gauge bridge
- Completion resistors
- Sealing kit (to be ordered separately)
